Spec 81

Anti-Corrosive Metal Primer

CAT NO: 8150381101 . T D NO: 81.101

Spec 81 is a one component anticorrosive primer formulated on an epoxy ester media, pigmented with no less than 35% zinc phosphate as a rust inhibitor. It is suitable for over coating with white spirit based products.

Spec 81

Anti-Corrosive Jointing Compound

CAT NO: 8109581133 . T D NO: 133

A smooth, homogenous, chromate free, anti-corrosive paste. It has been formulated specifically for use as a jointing compound between dissimilar metals such as aluminium and steel to eliminate corrosion by galvanic action.

Spec 81

Chlorinated Rubber

CAT NO: 81504 . T D NO: 8103581504

Acrylated Chlorinated Rubber, speciality product with outstanding resistance to the corrosive effects of salt water, chemicals etc. Designed for application by spray. The product can also be applied by brush.

Spec 81

Cosmetic Low Build Paint For Galvanized Steel Roofs

CAT NO: 8109981281 . T D NO: 281

Cosmetic Low Build Paint for Galvanised Steel Roofs is a one component system formulated on an isomerised rubber media, extended with 40% zinc phosphate 40% graphite and 15% micaceous iron oxide. This product is specifically developed as a treatment for application direct to galvanised steel carriage roofs.

Spec 81

Exterior Gloss Varnish

CAT NO: 8144381290 . T D NO: 81.290

Exterior Gloss Varnish is a one component air drying transparent coating based on a long oil modified alkyd resin solution. This product is for overcoating Rail spec gloss finishes when extra gloss retention and durability are required. It is also suitable for use over pale colours.

Spec 81

QD 'Touch In' Primer Undercoat

CAT NO: 8115481105/6 . T D NO: 105 & 106

QD ‘Touch In’ Primer Undercoat is a one component quick drying primer undercoat based on a medium oil length alkyd. The dry film has a semi-gloss finish and is suitable for overcoating with white spirit based products. Also whilst the product has excellent brushing and flow properties, it can also be applied by air or air mix airless spray.

Spec 81

Gloss Finish

CAT NO: 81081 . T D NO: 200-255

Spec 81 Gloss Finish is a one component air drying high gloss finish based on a unique urethane/silicone modified alkyd. The product has a distinct creamy structure, which gives easy application and excellent brushing properties. The dried film has high initial gloss, good gloss retention, resistance to chalking and dirt shedding properties.

Spec 81

Grey Etch Primer

Spec 81 Grey Etch Primer contains Zinc phosphate as an anti-corrosive pigment. Suitable for mild/galvanized steel and aluminium after appropriate cleaning. P0658 can be force dried and also possesses moderate heat resistance, can be over coated with most types of paint finishes and offers excellent adhesion for further coatings.

Spec 81

Hard Stopping Filler

CAT NO: 8109581131 . T D NO: 131

Hard Stopping Filler is a smooth stiff paste based on a short oil varnish media. It has been formulated specifically for use as a traditional filler/stopper suitable for knife application to deep depressions etc.

Spec 81

High Build Paint For Galvanized Steel Roofs

CAT NO: 8109981280 . T D NO: 280

High Build Paint for Galvanised Steel Roofs is a one component system formulated on an isomerised rubber media, extended with 40% zinc phosphate 40% graphite and 15% micaceous iron oxide. This product is specifically developed as a treatment for application direct to galvanised steel carriage roofs.

Spec 81

Identification Paint

CAT NO: 8108581521 . T D NO: 520-537

This Identification paint is a Full Gloss Air drying vinyl modified alkyd finish. It is recommended for use over specified primers, undercoats and finishes when areas of identification are required.

Spec 81

Knife Spreading Filler

A smooth stiff paste based on a short oil varnish media. It has been formulated specifically as a traditional knife spreading filler for application to shallow surface irregularities.

Spec 81

Pink Two Pack Etch Primer

CAT NO: BASE 8153781104 . ACTIVATOR 815058104B . T D NO: 81.104

Pink Two Pack Etch Primer is a two component ‘wash’ etch primer combining a pigmented base with a tinted acid reactive activator. Specifically formulated for use as an adhesion promoter on aluminium, Zintec, galvanised steel and G.R.P. etc.

Spec 81

Quick Drying Dipping Primer

CAT NO: 8158581630 . T D NO: 81.630

Quick Drying Dipping Primer if formulated on a quick drying short oil alkyd. This product is primarily designed for use on rough castings and air reservoirs etc.

Spec 81

Shellac Knotting

CAT NO: 8109681150 . T D NO: 81.352

For use in the preparation of joinery for painting as an impervious covering for knots and other resinous areas liable to stain superimposed paint.

Spec 81

Undercoat

CAT NO: 81150 . T D NO: 151-165

Spec 81 Undercoat is a one component air drying undercoat based on a modified alkyd resin and formulated to give good flow, intercoat adhesion and gloss ‘hold up’. It is suitable for overcoating with one component gloss finishes, the undercoat has a traditional semi-gloss finish.

Spec 81

Underframe Black Gloss Finish

CAT NO: 8109181291 . T D NO: 291

Underframe Black Gloss Finish is a one component high build air drying modified alkyd finish. This product is specifically formulated to give a high build protective finish to rail vehicle underframes.

Spec 81

V T A Airless Spray Finish

CAT NO: N/A . T D NO: 81.452-456

This product is recommended for use on rail vehicles as un underframe finish.

Spec 70

MIO Black Airless Spray

CAT NO: 7008970030 . T D NO: 70030

High build urethane alkyd pigmented with micaceous iron oxide pigment formulated to protect structural steel. When suitably applied provides a tough abrasion and UV resistant finish offering excellent corrosion protection and weatherability. The product can be used as a finishing coat or incorporated as an intermediate (build) coat in a paint system.

Spec 70

MIO Brush Finish

CAT NO: 7009070250 . T D NO: 70250

High build urethane alkyd pigmented with micaceous iron oxide pigment formulated to protect structural steel. When suitably applied provides a tough abrasion and UV resistant finish offering excellent corrosion protection and weatherability. The product can be used as a finishing coat or incorporated as an intermediate (build) coat in a paint system.

Spec 70

MIO Grey Airless Spray

CAT NO: 700897027A . T D NO: 7027A

High build urethane alkyd pigmented with micaceous iron oxide pigment formulated to protect structural steel. When suitably applied provides a tough abrasion and UV resistant finish offering excellent corrosion protection and weatherability. The product can be used as a finishing coat or incorporated as an intermediate (build) coat in a paint system.

Spec 70

Roof Canvas Bonding

Product Code: 7709657/12

A smooth homogenous paste, specifically developed as an adhesive for roofing canvas. This product can be overcoated with the High Build Galvanized Roof Paint as well as the Graphite Grey Roof Paint.

Transpeed

Anti-Corrosive Primer

CAT NO: 03539 . T D NO: 102

Transpeed Anti Corrosive primer is a modified alkyd, one component product pigmented with zinc phosphate rust inhibitor. Whilst the product has excellent brushing properties it can also be conventional and airless spray applied.

Transpeed

Armourplate

CAT NO: 3614200004

Transpeed Armourplate is a low odour Water-based two pack epoxy MIO/MICA finish. Virtually free of volatile Organic Compounds the product is EPA compliant. Can be used as a one coat finish over suitably prepared substrates, and when fully cured will give an extremely tough and durable finish. Combines the advantages of epoxy resins with the impermeable lamellar pigmentation of MIO/MICA to give enhanced protection against corrosion.

Transpeed

Extra Pale Body Varnish

CAT NO: 03420PV7 . T D NO: 161

Transpeed Extra Pale Body Varnish is a air drying extra clear varnish based on a specific alkyd medium. For application over Transpeed Finishes to improve gloss retention and overall durability.

Transpeed

Bright Aluminium

CAT NO: 42060M5P37 . T D NO: 139

Transpeed Aluminium is formulated on a Pale Coumarone/Hydrocarbon Resin and pigmented with a specially selected grade of bright aluminium paste. For use on chassis, radiators, pipe-work, storage tanks and other surfaces where a bright reflective finish is required.

Transpeed

Fastcoat MIO Protective Coating

CAT NO: 19060/61 . T D NO: 146

A fast drying one pack product formulated on a short oil alkyd medium combined with the impermeable laminar pigmentation of Micaceous iron oxide. The inherent properties of this product make it equally suitable for the protection of commercial vehicle chassis and exposed structural steelwork.

Transpeed

Fleetprime

CAT NO: 36541 . T D NO: 116

Transpeed Fleetprime is based on a modified short oil alkyd resin combined with suitable solvents to give relatively quick drying and overcoating times. Its pigmentation includes the use of zinc phosphate as an anti-corrosive inhibitor. Primarily intended for use as a quick drying fast build primer. Can also be used as a two part primer surfacer by hardening with 82 PV5 Activator.

Transpeed

Fuel Resistant Chassis Enamel

CAT NO: 42058 . T D NO: 140

Transpeed Fuel Resistant Chassis Enamel is a one pack product formulated on an air drying urethane modified alkyd. Principally for refinishing Chassis, it can also be used for plant and machinery. Available in standard colours Black and Red. Special colours to order, contact Sales department.

Transpeed

Matt Transport Finish

CAT NO: 02008 . T D NO: 128

Transpeed Polyurethane finish is a one component product formulated on an air drying urethane modified alkyd. Specially formulated to combine good flow, high opacity and a matt finish.

Transpeed

Monocoat

CAT NO: 12079 . T D NO: 119

This single pack product is based on a modified alkyd resin system dissolved in aromatic hydrocarbon solvent and incorporating anti-corrosive inhibitive pigmentation to give enhanced protection against weathering and corrosion. The unique properties of this product enable it to be used as a one coat system over a prepared substrate.

Transpeed

Polyurethane Finish

CAT NO: 03040 . T D NO: 120

Transpeed Polyurethane finish is a one component product formulated on an air drying urethane modified alkyd. Specially formulated to combine good flow, high opacity and a high-gloss finish.

Transpeed

P1625 Rustkote

This high performance single component water based rust converter/primer is designed for application to rusty steel with minimal surface preparation. It is designed to offer a highly effective solution where blast cleaning is not practical for reasons of cost, safety, practical or environmental constraints. It is non-flammable, non-toxic and has rapid drying properties

Transpeed

Semi-Gloss Transport Finish

CAT NO: 03087 . T D NO: 129

Transpeed Semi Gloss finish is a one component product formulated on an air drying urethane modified alkyd. Specially formulated to combine good flow and high opacity with a semi-gloss finish.

Transpeed

Two-Pack Acrylic Non-Isocyanate Paint

A two component isocyanate free acrylic finishing coat, designed for direct to metal applications or over existing paint finishes. Provides excellent light stability, weather resistance, good solvent and petrol resistance, and good flexibility.

Transpeed

Undercoat

CAT NO: 03110 . T D NO: 103

Transpeed Undercoat is a one component product formulated on an air drying modified alkyd. Principally for application by brush, it can, if required, be applied by conventional spray.

Mastercraft

Chlorinated Rubber Road Marking Paint

CAT NO: 36037 . T D NO: 326

This product is a Chlorinated rubber based marking paint. Recommended for use upon factory floors, car parks etc. to mark out specific areas.

Mastercraft

One-Pack Concrete Floor Paint

CAT NO: 66050 . T D NO: 340

Mastercraft One Pack Concrete Floor Paint is a single component solvent-based paint for brush or roller application. It has good adhesion to concrete; masonry and sound clean paintwork.

Mastercraft

High Build Bitumen Gel

CAT NO: 6088500E53 . T D NO: 00E53

High Build Bitumen Gel can be specified as a higher solids bituminous coating than traditional standard bitumen paints. It is black in appearance and compatible as a waterproofing and protective coating for a wide variety of substrates (iron, steel, lead, zinc, aluminium, asbestos, cement, concrete, stone, wood, felt and brick). When dry, the product forms an odourless taint-free black film.

Mastercraft

High Build Chlorinated Rubber

CAT NO: 34036 . T D NO: 329

Acrylated Chlorinated Rubber, speciality product with outstanding resistance to the corrosive effects of salt water, chemicals etc. Specially formulated for high build applications.

Mastercraft

High Solids Enamel

CAT NO: 43050 . T D NO: 131

Mastercraft Enamel is a one component product formulated on an air drying long oil alkyd. Specially formulated to combine good flow, high opacity with a high-gloss finish.

High Temperature Paint - Matt Black/Aluminium

CAT NO: N/A . T D NO: P0027

This paint is based on a silicone polymer providing a tough durable coating, contains MICA, and is heat resistance up to 450°C. The paint film will not degrade below this temperature, however adhesion may be affected by the physical aspect of heating and cooling (expansion and contraction) of the substrate.

Mastercraft

QD Enamel

CAT NO: 1202400E55/1254000E55 . T D NO: 320

Fast drying Styrene Modified Alkyd Finish, for application on plant and machinery where its fast drying properties may be an advantage. Obtainable in a standard range of colours plus specials to order.

Mastercraft

Yacht Varnish

CAT NO: 30414 . T D NO: 573

A conventional synthetic resin varnish, for use on external timber, where durability and resistance to weathering are required.

Mastercraft

AC 100

CAT NO: 36540 . T D NO: 308 Mastercraft AC 100 is a single component anti-corrosive primer based on a chain stopped modified short oil alkyd resin combined with zinc phosphate inhibitive pigmentation. Available in Red Oxide, White, Black and Grey with a Satin finish when dry.